23.09.2026
Safe access to heights, digitally planned
Everything from a single source: HYMER access technology expands its ladder configurator, CAD service and standards consultancy for fixed ladders.
Wangen, 23 September 2026 – Whether on a silo, a flat roof or a façade: fixed access ladder systems must be suited to the specific installation situation, comply with the relevant standards and integrate seamlessly into the planning of new-build or refurbishment projects. HYMER access technology, based in Wangen im Allgäu, supports planners, plant engineers and manufacturers of silos and tanks throughout the entire process: from selecting the appropriate standard, through digital configuration and CAD data exchange, right through to site surveying, delivery and training.
“What matters most to our customers is that access to height can be planned safely and implemented in accordance with standards,” emphasises Christian Frei, Sales Manager for Access Technology at HYMER-Leichtmetallbau GmbH & Co. KG. The company’s fixed ladder configurator is therefore continuously being expanded to include practical components.
New modules in the fixed ladder configurator
With the fall arrest rail, a further fall protection system can now be selected directly within the configurator. It is automatically guided upwards during access and locks in the event of a fall.
For larger wall distances, a new exit with handrail and platform is available, which bridges distances of up to 440 millimetres. Installation scenarios that previously required bespoke design can now be implemented using a standard item (item no. 20000972). As fixing points on the tank roof are often not required, this solution is suitable for silo and tank manufacturers.
Also new in the configurator are four pre-configured HYGHTS access railings, including HYGHTS ladder connectors. The load-bearing railings allow roof access without penetrating the roof and ensure a crossover from the fixed ladder to the secured roof surface that complies with standards.
For access to and exit from flat roofs, the access technology experts at Wagener have also added a ballasted ladder crossing (order no. 0055823) to their range. It requires no screw fixings or other intervention in the roof membrane; stability is achieved via ballasting and an anti-slip building protection mat. Depending on the type, the manufacturer states that the following descent heights between the top edge of the roof and the top edge of the platform are permissible: 315 to 915 millimetres for fixed aluminium ladders, and 605 to 1,165 millimetres for fixed steel ladders.
CAD data in both directions
In addition to the configurator extensions, the access technology manufacturer is expanding its CAD service for planners, designers, plant engineers, and silo and tank manufacturers. Two options are available: customers can obtain CAD data for the planned access ladder system from HYMER-Steigtechnik and integrate it into their projects. Alternatively, customers can send their existing CAD data or planning documents to Wangen if they wish the system to be designed by the experienced access technology engineers there.
Clarity on the choice of standard
In practice, there is often uncertainty as to which standard applies to a planned fixed ladder. The decisive factor is the location of the access point. If the access is to a building or a structural system, DIN 18799 generally applies; if, on the other hand, the fixed ladder leads to a machine system or a machine system, DIN EN ISO 14122 is the relevant standard.
“It is important to us to provide planners with personalised support from the initial enquiry about standards right through to implementation,” explains Christian Frei. To this end, the access technology manufacturer offers a bespoke standards consultancy service, in which the specific installation situation is assessed together with the customer to avoid the need for subsequent re-planning.
Measurement service for unclear installation conditions
If the on-site dimensions are unclear or if complete planning documents are not available, HYMER-access technology provides support through a measurement service. This means that customers do not have to carry out the planning solely on the basis of their own measurements or incomplete documentation; the service complements the project support, particularly in complex installation situations.
Seminars for training competent persons
The range of services is rounded off by seminars for training competent persons in the use of fixed access ladder systems. These seminars provide the specialist knowledge required for the safe operation and regular inspection of the systems and expand the range of services to include training.
“Our aim is to make it as easy as possible for planners and operators to install an access ladder system that complies with standards. That is why we support them not only with the right products, but also with digital planning tools, advice and supporting services throughout the entire project,” concludes Christian Frei.
PRESS CONTACT
Ralf M. Haßengier
PRX Agentur für Public Relations GmbH






